Passenger Seat…
April 30, 2019I picked up a passenger seat for the EVO project on eBay. It is a take off from a Dyna Wide Glide or some other Dyna model. It was pretty in-expensive (less than $40), especially since it is an actual Harley OEM…
Build. Tinker. Ride. Trials and Tribulations (and good times) of my motorcycle projects and other garage tinkering. Learning and building things. Building, wrenching on, and riding Harley Davidson Evolution Sportsters, Big Twins, and anything else with two wheels. Currently working on restoring and preserving a 1988 Harley Davidson Sportster chopper. I also post information on other DIY projects I tinker on.
I picked up a passenger seat for the EVO project on eBay. It is a take off from a Dyna Wide Glide or some other Dyna model. It was pretty in-expensive (less than $40), especially since it is an actual Harley OEM…
First time in a couple weekends I have had a chance to do some tinkering on the 1992 EVO project. Just a lot of stuff going on with family, other projects, and work. The frame is painted and ready to start putting…
I know this is not motorcycle related, but Spring has sprung and Summer is on the way. Things are still moving forward with the 1992 EVO Project, but with the weather warming up I have a few projects to do in the…
Shortly after I purchased my Street Glide I replaced the stock air shocks. Replaced them with a set of Harley shocks which were recommended by the service guy at Bayside. I guess they were ok, a little expensive but they handled fine,…
Fixed up a couple of my welds and hit the whole frame with a wire wheel. Then sanded the entire frame with 220 grit sandpaper. Cleaned it all up with some degreaser. Probably would have been easier (and maybe better) to have…